This circuit is nice for experimenting! One of many change positions is wired to a pair of mini alligator clips. You should utilize this change setting to rapidly take a look at numerous completely different capacitors (Determine D
). Plug it in between your amp and guitar after which swap out completely different values of caps. Hear rigorously to every one to seek out the 5 capacitors that sound greatest to you. Then return and solder these caps into the opposite change positions, leaving one place unused for the bypass setting.
To make the holes within the can for the jacks and change, use a step drill (Determine E
). It gained’t seize like a twist drill and also you’ll get a cleaner gap.
I mounted the mini alligator clips onto a small piece of plastic strip (Determine 
F). Utilizing a soldering iron as a warmth supply, I softened and bent the edges of the strip to make two ears. Two small magnets, super-glued to the ears, maintain the strip in place inside the underside of the salsa can (Determine G
).
Now: plug in, “tone” on, and rock out!
